How to weave a heart motif on a pin board loom

Hearts are one of my most favorite design motifs ever.

I decided that I should design a tiny little woven heart motif as a project for the ‘Stitch Red’ heart health campaign, and also work as an embellishment on a special ‘I love you’ scarf for my daughter.

Here’s the link to the previous post about using tambour crochet to embellish the scarf: Link

The yarn used in the heart motif is from Koigu, made specially for the Stitch Red campaign. Link

Here is the pattern to make the pin board loom to weave the heart:(Note: Print it out so the pattern is 2 inches by 2 inches)

Materials and equipment: a square of foam (I upcycled some packing material) that’s about 4 inches square by an inch or so thick.

34 pins or 1 inch fine finishing nails. (You may need a nail file to file rough edges off the tops)

A 3 or 4 inch square of clear plastic from a clamshell package or other recycled thingie.

Knife to cut the foam, scissors.

2.5 mm crochet hook

small tapestry needle

Instructions

1: Copy the pattern, and trim to fit the size of piece of foam.

2: Place the piece of clear plastic over the pattern. Push the pins into the dots.

Warping: The right hand arch of the heart is held vertical and the left hand arch is horizontal.

3: Tie 2 strands of yarn together (Note, you need to be working with fine yarn, like a sock weight) and place over the pin at the point of the heart.

4: Skip 8 pins, go around the next pin and down to the lower edge, and around the pin to the left of the pin at the point.

5: Go up and down across the 5 pins at the top and their mathcing pins on the lower edge.

6: Take the yarn up to th emifpoint pin (there are 3 empty pins above it) and down.

7: Go up and down across the next 5 sets of pins. There will be 3 vertical pins/nails left empty. Make an ‘8’ around the last set of nails to bring the yarn back down to the lower set of nails.

8: Weaving

Row 1: Weave hook from right to left: Over 4/Under 4 between the 1st and 2nd pins.

Make a loop of  yarn and place it on the hook, then draw it through the warp strands. Place the loop on the 2nd nail on the right hand side.

Adjust yarn.

Rows 2 & 4: Weave Under 4/Over 4 across, pick up the loop of yarn, ease through, place loop on nail/pin.

Row 3: WEave Over 4/Under 4 across, pick up loop, ease through, place on nail on right hand side of loom.

Rows 5 & 7: Weave )ver 4/Under 4/Over 4/Under 4/Over 4… make loop, ease through, place on pin on right hand side.

Note: on Row 7, the yarn passes by 5 pins before it’s woven in.

Rows 6 & 8: U4/O4/U4/O4/U4 make loop, ease through, place on pin on right hand side.

Row 9: Working with top 3 pins only: U4/O4/U 4 make loop, ease through, place on pin on right hand side. (It already has loops on it, but not to worry).

Finishing:

Wrap the yarn around the circumference of the heart 2 1/2 ties and snip.

Working in a counter clockwise direction: Thread the yarn ends into a darning needle and  lift the stitches off, one by one, stitching through them.

Some nails have 2 sets of threads on them, so lift the sets of yarn off one at a time.

Stitch over the long floating threads to capture them.

Stitch twice at the tip of the heart.

Untie the beginning knot and weave in the ends.

Adjust the circumference stitching to shape the heart, and stitch through the outside edge again if desired.

Weave in ends and trim.

The hearts can be used to embellish or trim scarves, hats, mittens, gloves, cowls, hair ornaments, bags, stuffies, dolls, toys, blankets, shawls, stoles, vests, coats, wall hangings, cellphone and tablet covers. The sky’s the limit!

Here’s the video tutorial on how to weave the heart motif:

I think that people might like to have a heart loom in wood, so I asked Donna and Gary McFarland of Dewberry Ridge looms Link if they would make them, and they said yes, so if you want one, drop them a note.

PLEASE NOTE: All content of this blog, including video, audio, written and photographed is the sole work and property of Noreen Crone-Findlay, and MAY NOT be used without my permission. Thanks so much!