Tag Archives: #woodworkingart

Charlotte Mermaid

Last month, I posted about Bedelia Mermaid, whom I carved from a very hard old piece of wood that was upcycled from a very old and fallen apart bed. LINK

Her sister, poor thing, languished in the freezer for several weeks, because I needed to force some moisture into the rock hard wood.

Bedelia thought that I was being rather harsh with her poor sister!

I named her ‘Frozen Charlotte’, which is actually a kind of doll that doesn’t have moveable arms and legs, but in this case, it was because she spent so much time in sub-zero temperatures.

Freezing the moistened wood made a world of difference!

When I tried carving Charlotte’s arm, I was delighted- carving the wood was now possible without my knife going instantly dull.

So, I moved on to carving the rest of her:

Bedelia kept her sister company:

And, when Charlotte was finally done, they sat and enjoyed finally being together after poor Charlotte’s dreadful time in the freezer.

Bedelia told Charlotte about some more sweet mermaids that have joined the flutter of memaids in the studio and wanted to introduce her to them.

Charlotte is rather shy, perhaps because of the time in the freezer – it takes her time to warm up to new people.

But when she met the sweet Bunnymaids, she wasn’t shy at all, and she whispered to Bedelia that she likes them very much.

Baby Bunnymaid held Charlotte’s hand, and they all sang a small song and decided that they were happy to be in such fine company.

Unfortunately, Charlotte is still feeling very cold, so I think that I will have to do something about that!

SCRAP HAPPY- Once a month, a group of bloggers who are into upcycling all post on the 15th of the month, sharing what they have created with upcycled bits of this and that in the past month. Charlotte’s introduction is my contribution to Scrap Happy for this month.

Here are the other Scrap Happy bloggers- I always love seeing what they have been up to!

Kate Gun, EvaSue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, JanMoira, SandraChrisAlys,
KerryClaireJeanJon, HayleyDawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, NanetteAnn, NancyDawn 2, Noreen,
Bear, Carol, Preeti and Edith

22 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, mermaid, wooden dolls, woodwork

Bedelia the Mermaid and where she came from

Once upon a time, there was a very, very old wooden bed frame.

It was so old that parts of it broke, and so it was taken apart and about to be thrown in the trash, when someone thought… wait… we know someone who makes things come to life again….

They gave the broken old bed frame to my son, who offered a piece of it to me:

It was very heavy old wood, which soon revealed itself to be exceedingly HARD… and I mean H.A.R.D wood!

I cut out 2 little mermaids from the former bed frame, wiggling around to try to deal with long notches, deep channels and bored out holes that large screws had once lived in.

I sanded the varnish off one set of mermaid blanks, and then remembered to take a picture of the ‘under construction’ stage… some of those scraps of wood are not useable for carving because they have hardware embedded.

Oh my word!  Carving the old hardwood was incredibly challenging, and there were a couple of nights when I was carving until the wee small hours.

I was so happy to finish carving Bedelia, but the incredible hardness and knife dulling properties of the wood made it oh so NOT fun to carve.

So, I am conducting an experiment:

Bedelia’s sister had a long lovely soak, which I hope will make the wood more carving friendly.

And now, oh, poor little mermaid!

She’s in the freezer, waiting for me to have enough time to carve her!

My fingers are crossed that I haven’t destroyed the wood with the soaking and the freezing,

and that I will be able to release the latent mermaid from her cryogenic state soon and more easily than Bedelia!

The next stage of bringing Bedelia to life was to burn and paint her Mermaid scales:

And then assemble her, making all her joints function:

Bedelia wanted to have some Mermaidly fun, so she went for a swim:

Which was a lot of fun, but very tiring, so she came back and relaxed in the studio.

Tottie Tomato went and made Bedelia a lovely cup of tea.

But she was still cold from the wild waves, so I went rummaging through the box of threads that I inherited from my Mother.

And crocheted a lace shawl for Bedelia.

She’s very happy and is looking forward to meeting all the other dolls in the studio.

She is  hopeful that I will get to carving her poor icy sister, very soon!

I hope so, too… but the studio has been a busy place lately, the icy mermaid will have to fit in with the other magic that is being stirred up!

I am so pleased to now be part of a lovely blogging group: Scrap Happy,  that was begun 6 years ago by Kate Chiconi and her friend, Gun, in Sweden.

The Scrap Happy bloggers all post once a month on the 15th about the wonderful things that they are creating from scraps of this and that, and none of it new….

please check out their blog posts, too.   😀

Kate , Gun, Eva, Sue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, Jan, Moira, Sandra, Chris, Alys,
Kerry, Claire, Jean, Jon, Hayley, Dawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, Nanette, Ann, Nancy, Dawn 2, Noreen,
Bear and Carol

21 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, lace making, mermaid, Tottie Tomato Loves, Uncategorized, upcycling, wooden dolls, woodwork