Part 3 of the video tutorial series on how to weave inkle bands on Mirrix looms is about the weaving process:
copyright Noreen Crone-Findlay
Something that I learned as I trundled up my ever so steep learning curve with figuring out how to weave inkle bands on the Mirrix loom:
I started out by weaving one row on one band, putting it’s shuttle down, then picking up the second shuttle and weaving one row on the other band.
Sounds slow and clunky, doesn’t it? Well, you’re right.
The most efficient way to weave 2 bands at once is to weave as far as you can on one band, then set that shuttle aside, and weave away on the second band.
Oh… speaking of shuttles, here’s the tracing of my most favorite inkle shuttle:
copyright Noreen Crone-Findlay
I designed this one several years ago, and I love it. Works like a charm.
Here’s the video that shows the weaving process:
copyright Noreen Crone-Findlay
When you need to advance the warp, loosen the tension quite a lot.
Support the spring as you gently ooze the warp rod around and up the back of the loom.
Pat the warp strands back into the channel, and tighten up the tension again.
Remember, you do not need to have the tension as tight as when you are weaving a tapestry or beading.
You’ll find the perfect tension that suits you best.
Keep on weaving until the warp rod is sitting on top of the loom, and then check into the 4 th video in the series:
Link to purchase pattern for Inkle dolls: Inkle Dolls
And, they are wonderful for trimming handwoven clothing:
copyright Noreen Crone-Findlay
Link to post that shows how to shape inkle bands to make a yoke or other shaped pieces of garments: Warp pulling
Over the years, I have also made hat bands, book marks, all kinds of jewelry, key fobs, vests, bags, bag handles, the garters for the men’s kilt hose for my son’s wedding, shawls, freeform pieces that combine inkle weaving, knitting, embroidery, spool knitting and crochet, as well as rugs.
Yep. I love inkle weaving.
So, as I have been exploring the possibilities of weaving with my Mirrix looms, I had to give inkle weaving a try.
I found that it was quite challenging at first. But, I don’t give up easily 🙂
I ended up spending waaaaaaaaaaaaaaay more hours than I should have, experimenting and obsessing over making inkle bands on the Mirrix.
Well… I finally succeeded.
Since it was so challenging, I figured that I should share what I have learned, so that other intrepid inkle weavers can leap right in, without all the trial, error and frogging that I went through!
There are definitely tricks to weaving inkle bands on the Mirrix looms, and I have made 4 videos to share those tricks.
Here’s part one of the video:
Here is the draft for the bands that I wove in the videos:
copyright Noreen Crone-Findlay
To read the draft: Each square represents one warp strand.
You can check your warping by looking at each shed to see that it has the same number of strands, in the order that they appear in the line.
You will be putting a total of 8 green strands on, followed by 4 orange strands, 3 sets of (1 orange, 1 green) for a total of 6 strands, then 4 orange strands and ending with 8 green strands.
At the top and bottom of the loom, you’ll see the full count of warp strands.
At the warping bar, the 2 sheds will be separated into their correct (we hope!) configuration for each shed.
The chart will give you bands like this:
copyright Noreen Crone-Findlay
The upper band is the band on the right hand side of the loom in videos 2 – 4.
I only used the center of the draft for it, without the green border strands.
The yarn is Lion Brand Cotton.
copyright Noreen Crone-Findlay
Setting up the loom for inkle bands is different than normal warping.
You need to have the warping bar at the front of the loom.
copyright Noreen Crone-Findlay
Tie the green yarn onto the warping bar and take it up and around the loom, just the same as if the warping bar was in the back.
copyright Noreen Crone-Findlay
You will need to cut the warp strand of color 1 to tie on color 2 at the warping bar, for EVERY color change.
WHAT?!?!?!
Yes. really.
It sounds insane, but this is the biggest key to making the whole inkle thing work on the Mirrix loom.
Trust me. You ~can~ twist your yarns around each other, and are welcome to, I’m sure, if that would make you happy….
BUT…. the quickest, easiest way to have problem free warping for inkle is to cut those little darlin’s and tie the knots between the colors.
copyright Noreen Crone-Findlay
Yay! Warped! Insert the spring rod into the spring to keep the warp strands locked into their notches.
This is sooooooooooo important! (yep… voice of ‘oops’ experience here 😦 )
And in Part 2…. it’s on to the heddles.
I have a nifty, super friendly way of using a crochet hook and weaving stick to make the heddling process go like a breeze.
I am fascinated by exploring all the different things that I can do with Mirrix looms.
While I am involved in this four month long co-creation with Mirrix looms, I am going to be looking at what I can and can’t do with the Mirrix looms.
(Guess what I am NO GOOD at? Bead weaving on the Mirrix!
Yep. All my bead weaving has been off loom and I am TERRIBLE at bead weaving on the loom.Â
That one came as a surprise…Â ah well… we shall see if that changes! )
In my previous blog post, LINK, I showed how I set up my Lani Mirrix loom, using the ‘No Warp Ends’ warping technique.
copyright Noreen Crone-Findlay
There are several advantages in setting up your Mirrix loom for the ‘No Warp Ends’ technique:
It allows you to sample different weaving techniques quickly and efficiently.
You won’t waste time OR yarn when using the ‘No Warp Ends’ technique.
I love that!
Because the ‘No Warp Ends’ warping technique precludes using a shedding device, it is perfect for weaving techniques that are hand manipulated, like: LENO lace! Yay!
I think that Leno lace is the bee’s knees.
It’s kind of a miniature version of the ancient technique of twisting fibers, called, Sprang.
You do this nifty twist thing, and tadah! You get a bonus free row that is cheerfully waiting for you, gratis! Whee!
copyright Noreen Crone-Findlay
Leno can seem a little challenging at first, so I figured that a video tutorial is a good idea.
My daughter-in-law spins gorgeous yarn. Which makes me very happy.
Because, sometimes a skein or two finds its way into my studio.
Recently, she spun Merino and silk and dyed it turquoise and purple, separated by short sneezes of sunshine yellow.
copyright Noreen Crone-Findlay
I love it, and have been puzzling over how to use it in one of my new tapestries in a way that keeps the integrity of the colorway, while working across the entire width of the tapestry. Weaving narrow bands of it in vertical columns would not be a problem with maintaining the colors as units… but… horizontally- ah, well… that’s another cup of soup entirely.
I didn’t want to have the colors end up in little splats of one color arguing with another.
That meant working in short segments, weaving small blocks of each color.
I could have woven little squares of each color, with little slits that would need to be stitched or interlocked. Myech…
I sat down with my trusty little pencil and thought about this conundrum….
and came up with this:
copyright Noreen Crone-Findlay
If I started at the left hand edge, and wove a little triangle with one length of turquoise, then, I could use the little bursts of yellow to tell me when to nip down, and start a slanting wedge of purple.
This completely worked for me! I wouldn’t have any joins to deal with, and I could work each little section of color in order, so the colorway of the yarn stays intact.
It’s a happy solution to an interesting problem!
Tapestry weaving is full of nifty little voyages of discovery 🙂
copyright Noreen Crone-Findlay
My first little purple patch was not so perfect, but by the time I had woven across to the right hand side I was pleased with it.
I love buying vintage crochet cotton at the thrift shop. It speaks to me of the hands that it has passed through, and the pleasure it has brought to other thread lovers.
I like to use it in my weaving, crochet and tatting, as it gives me a sense of connection to needlewomen of the past.
BUT… storing balls of crochet cotton can be a problem. Those hollow cores take up a LOT of space!
So, for many years, I have been upcycling old credit cards or pieces of cardstock to make bobbins like this:
copyright Noreen Crone-Findlay
Because, storing yarn or thread on a small flat bobbin is so much more efficient than leaving it on the cardboard tubes:
copyright Noreen Crone-Findlay
Last night, I had insomnia, and was thinking about winding off a pile of vintage crochet cotton, when I had a flash of inspiration!!
Instead of making chubby little embroidery style bobbins, if I made ‘dog bone’ shape bobbins, I could use my bobbin winder to speed up the process of winding them. AND, they’d take up less room, as it would be a longer, leaner shape.
I jumped out of bed, and started cutting the new shape bobbins:
copyright Noreen Crone-Findlay
And, winding up balls of cotton:
copyright Noreen Crone-Findlay
In a twinkling of an eye, I have compactly wound bobbins that won’t tangle with other bobbins, as the thread is taken through a slot and secured. Another bonus! No snaggles!
copyright Noreen Crone-Findlay
This shape of bobbin is great for warping the Mirrix loom, as it’s so compact. Yep – it’s a win!
And, they can be easily stored in unusual containers, like this:
copyright Noreen Crone-Findlay
I made a video to show how quickly and easily this works:
I haven’t tried using these bobbins for tapestry weaving, but I will, and will let you know how I like them.
I love making tapestry bobbins from wood- especially upcycled wood, so I will be showing you how I do that in an upcoming post.
Happy weaving, and here’s to creative ways of storing yarn and thread stash! 😀
At the beginning of May, a ‘new-to-me’ loom , a large Mirrix tapestry loom, arrived in my studio. (Courtesy of my son and daughter in law who picked her up in the city 4 hours away, that used to be her home- the previous owner didn’t want to ship her).
copyright Noreen Crone-Findlay
I immediately sat down and made a whole lot of heddles for her, as she didn’t come with them.
And then, I warped her up- ooooooooohhhhhhhhhh, I love how easily she warps! Bliss!
As I was warping her up and starting to weave, I thought…. ‘Hmmmm…. there must be a group for Mirrix weavers on Ravelry’
(Ravelry= the facebook of the yarn world)
I looked, and sure enough! There is a Mirrix group…. which I joined, pronto.
And the first thing I saw was that Claudia (the inventor of the magical Mirrix looms) and Elena, her talented daughter, had posted that they were accepting applications for their annual ‘Social Networking for a Mirrix Loom’ campaign. Link
Well… I had decided within hours of starting to weave on my ‘Joni’ loom that I wanted to fill my studio with Mirrix looms.
So, I sent off an application….
Um… I wanted to fill the studio with ~Smaller~ Mirrix looms!
MEANWHILE>>>> The Joni is one big Mamma, and even though I am tall, my arms are short, so I found that I was having shoulder pain.
My clever daughter in law subtly sneaked the information out of me that I was longing for the treadle kit for the Mirrix loom. Then, she orchestrated the family buying me the treadle kit for Mother’s Day! What a sweetheart!
To say that I was thrilled was an understatement!
THEN! on the 18th of May, was just tickled pink to hear from Elena that they had picked me as one of their team for the 4 months of the ‘Social Networking’ campaign. Whee! What a couple of thrilling days!
And, now… I am starting to keep my part of the bargain, which is to chronicle my experiences with the Mirrix loom(s).
So, since I began my Mirrix adventures with making string heddles, I am going to show you my quick and easy way of making the string heddles for the Mirrix looms (or inkle or frame looms, too).
Tottie Talks Crafts Blog 