“Imagine” Banner Weave Along: PART TWO: How to embroider the narrow band

To see all the links for the ‘How To’ posts for the “Imagine” Banner Weave along, please go to L I N K S

To order the loom, book and extras kit for the Weave Along from Mirrix, please go to K I T

HOW TO EMBROIDER

THE WORD ‘IMAGINE’ ON THE NARROW BAND:

NOTE: The embroidery is done while the weaving is still on the loom and under tension.

1: Print out a copy of the ‘Imagine’ letters so they are approximately 1 inch/2.5 cm high by 7 in/17.5 cm or use 1/4 inch graph paper to draw them out.

2: Fold the paper so the edge of the letters can be placed right against the 1 inch/2.5 cm high white center section of the weaving.

3: Place the straight pins at the upright lines of the letters, ‘I’, ‘m’, ‘n’, and at the outside edges of the chubby ‘a’, ‘g’ and ‘e’.

4: Use the pins as guides to draw the letters onto the narrow band using a permanent felt tip marker.

5: Following the instructions on page 27 of “Innovative Weaving on the Frame Loom”, embroider the letters with dark blue embroidery floss.

The photo on the lower left of page 27 shows how the running stitch is done.

FRINGE:

6: Lift the weaving off the loom and remove the 2 pieces of cardboard.

7: Cut the ends of the loops at the right hand side of the narrow band (it was at the top of the loom) open.

8: Trim the ends that were at the lower edge of the loom, now the left hand side of the band, to the same length as the warp ends at the other end of the narrow band.

9: Tie a knot (left over right and under, right over left and under) with each set of 4 strands of yarn across both ends of the narrow band.

10: FINISHING THE NARROW BAND:

Steam the narrow band on the wrong side with a steam iron, being sure to not touch the iron to the weaving.

Finger press the narrow band to make sure that the fringes behave themselves and line up politely.

Trim them again if necessary.

1 Comment

Filed under frame loom weaving, gifts & easy to make gifts & presents, Loom & looms & small loom weaving, weaving & handwoven

“Imagine” Banner Weave Along: PART ONE: How to weave the narrow band

To see all the links for the ‘How To’ posts for the “Imagine” Banner Weave along, please go to L I N K S

To order the loom, book and extras kit for the Weave Along from Mirrix, please go to K I T

In order to weave the “Imagine” banner, you’ll need the following things:

Saffron Pocket Loom

Extender rod

Sandy Stand

Innovative Weaving on the Frame Loom Book

HERE IS A LINK TO THE BOOK AND SAFFRON LOOM KIT that is available on the Mirrix website. LINK

Other things that are needed for the ‘Imagine’ banner:

Yarn: Less than an ounce of each of the following colors: white, grey, black, pale blue, brown, beige

Embroidery floss: 1 skein of navy or dark blue

2 small black ‘e’ beads for the eyes and needle and thread to sew them on

Scissors

cardboard

a plastic page protector

a ruler

transparent tape

felting needles,

6 rubber bands

paper

long straight pins

permanent felt tip pen

plastic or metal ring to hang the banner

1 Weaving Needle (5 1/2 inches or 6 inches long with a blunt tip)

1 Shed Stick: a second weaving needle or 6 inch Paddle style bamboo Cocktail Skewer or a short dpn knitting needle

1 craft needle (short metal tapestry needle approximately 2 3/4 inches long)

-1 crochet hook: 4.5 mm crochet hook works just fine

PART ONE:

THE WOVEN AND EMBROIDERED NARROW BAND:

The narrow band in Albert Einstein’s hands is woven (with a couple of small modifications) following the instructions on page 171 of “Innovative Weaving on the Frame Loom” for the Alpaca Blanket. While it’s still on the loom, the word, ‘Imagine’, is embroidered using a simple running stitch.

INSTRUCTIONS:

1: SET UP THE LOOM so it is 11 1/2 inches / 29 cm from the lower set of pegs to the upper set. Lock it into the ‘Sandy Stand’.

2: WARP THE LOOM: Following the instructions for the Alpaca Blanket on page 171 of ‘Innovative Weaving on the Frame Loom’, put on 10 sets of warp strands.

Use 2 strands of #4 Medium weight (Worsted or Sport weight) yarn held together as if it is a single strand.

Skip 6 pegs at each side of the loom and warp the following colors, or your choice of colors:

NOTE: A ‘set’ of warp strands in this case means tying around one peg from bottom to top of loom and snipping it after tying the knot at the lower edge. The 2 strands of warp yarn are held together while warping the loom.

1 set of warp strands Black

2 sets Light Blue

4 sets White

2 sets Light Blue

1 set Black

3: Slide 3 rubber bands over the lower set of pegs and 3 rubber bands over the upper set of pegs to help keep the warp strands from jumping off.

4: Cut 2 pieces of cardboard that are 2 inches/5 cm tall. The piece that will go into the lower edge of the warp strands should be 5 1/2 or 6 inches/15 cm wide. The piece that will go into the upper edge of the weaving once it’s done can be just 3 inches/7.5 cm wide.

5: Weave the shed stick under 2/over 2 across the warp strands at the top of the loom.

6: Weave the longer piece of cardboard into the warp strands – slide it into the shed formed by the shed stick and push it down to the lower edge of the loom. This will make the warp fringe at the first end.

7: WEAVING:

NOTE: The instructions in the book say to pull in on the weft strands while weaving. When using the Saffron loom, that is not necessary.

With 2 strands of white yarn and a weaving needle, following the instructions in the book, weave until the weaving is 7 1/2 inches/ 19 cm tall.

Fold the shorter piece of cardboard in half lengthwise and weave it into the warp strands, then open it up. This will keep the weaving taut while you embroider the word, ‘imagine’.

The 2 pieces of cardboard – 1 at each end of the weaving are essential to keep the weaving in place while embroidering the letters.

1 Comment

Filed under frame loom weaving, gifts & easy to make gifts & presents, Loom & looms & small loom weaving, tutorial & how to, weaving & handwoven

“IMAGINE” Banner Weave Along

IMAGINE” BANNER

Woven on the Mirrix Saffron loom, using techniques fromInnovative Weaving on the Frame Loom”

A Weave Along by Noreen Crone-Findlay

The “Imagine” banner is a reminder about the power of creativity. Noreen Crone-Findlay, author of “Innovative Weaving on the Frame Loom”, has designed this banner as a weave along, featuring the delightful Mirrix Saffron Loom.

Albert Einstein has been credited with saying that he valued imagination over knowledge.

Now is certainly the time for us all to imagine that we can make things better, so hurrah for creativity, resiliency and imagination!

The 3 components of the ‘Imagine’ banner are all based on techniques that are featured in ‘Innovative Weaving on the Frame Loom’, with little tweaks so that you can make a unique and one of a kind celebration of creativity to inspire yourself and other people, too.

You will need the Mirrix Saffron Loom and ‘Innovative Weaving on the Frame Loom’ by Noreen Crone-Findlay (that’s me, of course) to participate in the weave along.

Mirrix is offering a kit that includes both, as well as other tools that are used to create the ‘Imagine’ banner.

HERE IS A LINK TO THE BOOK AND SAFFRON LOOM KIT that is available on the Mirrix website. LINK

You can use whatever yarn (#4 Medium weight yarn) that you like to weave the banner.

I will be posting the instructions for the Weave Along in 6 separate posts here on Tottie Talks Crafts,

beginning on Sept 13, 2021 .

PART ONE: How to weave the narrow band L I N K

PART TWO: How to embroider the narrow band L I N K

PART THREE: How to weave the 2 small triangles L I N K

PART FOUR: How to make the cardboard backing board for doing freeform weaving L I N K

PART FIVE: How to weave the homage to Albert Einstein figure L I N K

PART SIX: Assembling the banner L I N K

6 Comments

Filed under gifts & easy to make gifts & presents, Loom & looms & small loom weaving, tutorial & how to, weaving & handwoven

A lovely Scandinavian weaving workshop

Last week I enjoyed a wonderful weave along and slide show workshop on the zoom platform from the Sustaining Scandinavian Folk Arts department at the University of Wisconsin.

https://folklife.wisc.edu

The presenter was Laura Demuth. She was a lovely presenter- gracious and so well informed!

I am still swooning about the beautiful textiles that she showed slides of…. Scandianvian weaving is glorious!

I was delighted that the workshop participants were sent a sweet little loom from Hello!Loom.

https://helloloom.com.

When mine arrived in the mail, the first thing I did was to weave a little dress for tiny Willow, a doll that I carved a few months ago.

I started weaving the lady with flowers tapestry during the presentation as Laura demonstrated common motifs used in Scandinavian weaving. I finished the tiny tapestry the next day.

It was a lovely event and my thanks to all the people who worked so hard to make it happen!

Here’s a link to the workshop:

Center for the Study of Upper Midwestern Cultures (CSUMC) YouTube channel: 

https://www.youtube.com/watch?v=cxvpdWwWBIk&t=2398s

#sassloom2021 #folklife #helloloom #hellolooms #weaving #handwoven #smallloom #smallloomweaving #smalllooms

2 Comments

Filed under doll & dolls & dollmaking & doll making, frame loom weaving, Loom & looms & small loom weaving, tapestry, weaving & handwoven

How to Build a Folding Wooden Doll Chair

After I carved and wove 3 dolls that didn’t fit the doll furniture that I already had, (see Brown Paper Yarn Dolls) ,

I decided that I had to build them each a chair.

And so I built them each their own little chair with a seat woven on the Mirrix Saffron Loom, using instructions from my book: Innovative Weaving on the Frame Loom.

HERE IS A LINK TO THE BOOK AND SAFFRON LOOM KIT that is available on the Mirrix website. LINK

The Chairs are not in the book, but the weaving patterns are. See pages: 68, 50 and 45.

Here are the dimensions for the wooden parts of the chair:

The wooden pieces are all 1 cm thick and 2 cm wide.

Pieces A are 24 cm long (cut 2)

Pieces B are 20 cm long (cut 2)

Pieces C are 11 cm long (cut 2)

The Dowels are 1/4 inch in diameter:

A: Cut 2 that are 11 cm long

B: Cut 2 that are 9 cm long

C: Cut 1 that is 13 cm long

The Seat: Weave a piece of fabric that is 20 cm long by 7 cm wide and stitch through the end of the warp loops, over the top dowel of A and the front dowel of B.

The finished size of the chair is:

Height: 20 cm (8 inches)

From front to back: 18 cm (almost 7 inches)

Width: 13 cm at widest point (about 5 inches)

The dolls are very happy in their new chairs!

I have made a video, showing how to build the chairs- but please note that I forgot to show how I sew the weaving to the chair.

Oops.

I simply lifted the weaving off the loom and stitched through the warp loops with 2 strands of yarn, going over the dowel.

I hope that you will have fun making doll chairs for your dolls and teddy bears, too. ❤

Here’s the link:

Happy Chairmaking!

11 Comments

Filed under book review/book/books, eco crafts & green projects, Loom & looms & small loom weaving, tutorial & how to, upcycling, video tutorial, weaving & handwoven

How to Spin and Weave Brown Paper Yarn

One of my favorite eco friendly crafts is spinning yarn from brown paper….

This video shows how:

And, then, I love to weave the brown paper yarn into all kinds of fun things like this bunny and teddy bear.

I carved their heads from wood, and made their little shoes from scraps of garment leather that I glued to wooden soles that I carved. The navy shoes were made from a thrift shop coat that I cut and sewed into a ton of different things- bags and doll shoes and doll clothes.

I made their hands from scraps of heavy weight leather that I was given years ago.

Bunny’s face is lopsided because the scrap of firewood that I carved her from was wonky, but she forgives me for that!

I adapted this pattern from my etsy shop to weave their bodies on weaving sticks, using the brown paper yarn that I had spun: Here’s the link:

https://www.etsy.com/ca/listing/92453904/pdf-pattern-for-delightful-dolls-woven?ref=shop_home_feat_1

The brown paper yarn also works BEAUTIFULLY for weaving baskets. Here’s a link to my pattern for weaving baskets on weaving sticks:

https://www.etsy.com/ca/listing/111292892/pdf-pattern-for-all-kinds-of-baskets?ref=shop_home_feat_3

And, here’s the link for jewelry to weave with weaving sticks. Brown paper is wonderful for making jewelry!

https://www.etsy.com/ca/listing/124255671/ebook-jewelry-woven-on-the-stick-weaving?ref=shop_home_feat_4

I love all the neat things that can be made with brown paper yarn. In our house, brown paper is NEVER thrown away!

It always gets upcycled into nifty new things 😀

This is my contribution to the monthly ‘Scrap Happy’ Blogging group- people who delight in making things from scraps and upcycled bits of this and that post on the 15th of each month.

Here’s the links to the rest of the group. I always enjoy seeing what each of them has done each month:

KateGun, EvaSue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, JanMoira, SandraChrisAlys,
KerryClaireJeanJon , HayleyDawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, NanetteAnn, Dawn 2, Noreen (this is me, but you know that) ,
Bear, Carol, Preeti and Edith

7 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, teddy bear, tutorial & how to, Uncategorized, video tutorial, wooden dolls

Charlotte Mermaid

Last month, I posted about Bedelia Mermaid, whom I carved from a very hard old piece of wood that was upcycled from a very old and fallen apart bed. LINK

Her sister, poor thing, languished in the freezer for several weeks, because I needed to force some moisture into the rock hard wood.

Bedelia thought that I was being rather harsh with her poor sister!

I named her ‘Frozen Charlotte’, which is actually a kind of doll that doesn’t have moveable arms and legs, but in this case, it was because she spent so much time in sub-zero temperatures.

Freezing the moistened wood made a world of difference!

When I tried carving Charlotte’s arm, I was delighted- carving the wood was now possible without my knife going instantly dull.

So, I moved on to carving the rest of her:

Bedelia kept her sister company:

And, when Charlotte was finally done, they sat and enjoyed finally being together after poor Charlotte’s dreadful time in the freezer.

Bedelia told Charlotte about some more sweet mermaids that have joined the flutter of memaids in the studio and wanted to introduce her to them.

Charlotte is rather shy, perhaps because of the time in the freezer – it takes her time to warm up to new people.

But when she met the sweet Bunnymaids, she wasn’t shy at all, and she whispered to Bedelia that she likes them very much.

Baby Bunnymaid held Charlotte’s hand, and they all sang a small song and decided that they were happy to be in such fine company.

Unfortunately, Charlotte is still feeling very cold, so I think that I will have to do something about that!

SCRAP HAPPY- Once a month, a group of bloggers who are into upcycling all post on the 15th of the month, sharing what they have created with upcycled bits of this and that in the past month. Charlotte’s introduction is my contribution to Scrap Happy for this month.

Here are the other Scrap Happy bloggers- I always love seeing what they have been up to!

Kate Gun, EvaSue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, JanMoira, SandraChrisAlys,
KerryClaireJeanJon, HayleyDawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, NanetteAnn, NancyDawn 2, Noreen,
Bear, Carol, Preeti and Edith

22 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, mermaid, wooden dolls

Wooden Bunny Dolls and Crochet Hooks

As part of #the100dayproject challenge, I have been immersed in carving wooden dolls and following where that has lead me for my #100daysofcarvingwoodendolls.

I have been sharing images of wooden mermaid dolls that I have carved over the years, and also bunnies, too….

One little bunny doll, Sophia, sat on my carving desk for weeks and weeks without any arms and legs, and FINALLY, I put carving knife to wood and carved her chubby little arms and legs and I am totally delighted with her!

Sophia is VERY happy to be here in the studio and to be all done!

She then inspired me to carve her some bunny friends who were also inspired by the mermaids that I have been carving.

So, I have carved a trio of bunny mermaids from upcycled wood from a piano that fell apart and our friend the piano tuner rescued pieces of wood for us.

This is Jali and Franny with Sophia. Oops… I haven’t taken a picture with their very tiny wee sister, DebraLou, so here she is:
The nickle is there to show the scale of just how small DebraLou is. She’s a very small bunny mermaid, indeed!

And, then, because I was talking about bunnies, I got out some bunny crochet hooks that I carved quite awhile ago….

The Bunny Heart Spoon wanted to join in the fun, so she joined the rabbit crochet hooks.

AND… that inspired me to FINALLY finish carving a blank that I had made for a crochet hook 10 years ago! wow…

I am totally delighted with her and ….

she has inspired me to immerse myself in carving wooden ‘art’ crochet hooks again…. which is very inspiring and exciting, but that’s another story!

Oh my goodness. while I have been so busy posting images and notes daily to Instagram LINK I haven’t been keeping up with posting to my blog, and yikes, everything has changed here in a new and baffling way! I don’t like it at all and am flumoxed with how to deal with it…. so if this post is not quite right, it’s because I honestly don’t know what I am doing with this new and unwelcome and unfriendly way of posting! Fingers crossed that I can figure this out.

4 Comments

Filed under Uncategorized

Bedelia the Mermaid and where she came from

Once upon a time, there was a very, very old wooden bed frame.

It was so old that parts of it broke, and so it was taken apart and about to be thrown in the trash, when someone thought… wait… we know someone who makes things come to life again….

They gave the broken old bed frame to my son, who offered a piece of it to me:

It was very heavy old wood, which soon revealed itself to be exceedingly HARD… and I mean H.A.R.D wood!

I cut out 2 little mermaids from the former bed frame, wiggling around to try to deal with long notches, deep channels and bored out holes that large screws had once lived in.

I sanded the varnish off one set of mermaid blanks, and then remembered to take a picture of the ‘under construction’ stage… some of those scraps of wood are not useable for carving because they have hardware embedded.

Oh my word!  Carving the old hardwood was incredibly challenging, and there were a couple of nights when I was carving until the wee small hours.

I was so happy to finish carving Bedelia, but the incredible hardness and knife dulling properties of the wood made it oh so NOT fun to carve.

So, I am conducting an experiment:

Bedelia’s sister had a long lovely soak, which I hope will make the wood more carving friendly.

And now, oh, poor little mermaid!

She’s in the freezer, waiting for me to have enough time to carve her!

My fingers are crossed that I haven’t destroyed the wood with the soaking and the freezing,

and that I will be able to release the latent mermaid from her cryogenic state soon and more easily than Bedelia!

The next stage of bringing Bedelia to life was to burn and paint her Mermaid scales:

And then assemble her, making all her joints function:

Bedelia wanted to have some Mermaidly fun, so she went for a swim:

Which was a lot of fun, but very tiring, so she came back and relaxed in the studio.

Tottie Tomato went and made Bedelia a lovely cup of tea.

But she was still cold from the wild waves, so I went rummaging through the box of threads that I inherited from my Mother.

And crocheted a lace shawl for Bedelia.

She’s very happy and is looking forward to meeting all the other dolls in the studio.

She is  hopeful that I will get to carving her poor icy sister, very soon!

I hope so, too… but the studio has been a busy place lately, the icy mermaid will have to fit in with the other magic that is being stirred up!

I am so pleased to now be part of a lovely blogging group: Scrap Happy,  that was begun 6 years ago by Kate Chiconi and her friend, Gun, in Sweden.

The Scrap Happy bloggers all post once a month on the 15th about the wonderful things that they are creating from scraps of this and that, and none of it new….

please check out their blog posts, too.   😀

Kate Gun, EvaSue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, JanMoira, SandraChrisAlys,
KerryClaireJeanJon, HayleyDawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, NanetteAnn, NancyDawn 2, Noreen,
Bear and Carol

21 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, lace making, mermaid, Tottie Tomato Loves, Uncategorized, upcycling, wooden dolls

Elise was a Piano Once Upon a Time

This is a true story.

This is the story of how a tiny doll and her special hedgehog friend came to live in my studio….

Long, long ago, there was a seed, well several seeds, really.

They grew up and became majestic trees.

They sang the song of the wind and the sun and the moon and the rain and the stars for probably hundreds of years.

And, then they were cut down.

They became a piano.

And the piano sang  songs of love, and sadness and grief and joy.

Eventually, the piano wore out.  Completely.

The piano tuner shook his head sadly and declared it to be done.

But he had a friend who made things with wood, so he offered some of the wood from the piano to his friend.

His friend happily accepted the wood from the sad and gone piano, and because he is a generous and kind person,

he offered some pieces of the wood to his Mum.

That’s me.

I was sure I could feel a very, very tiny doll singing little tiny songs inside the wooden scrap….

I cut a little bit of the piano wood and loved how it felt in my hands….

I cut out rough shapes that would be just the right size to carve my favorite size of doll- 2 and a half inches tall.

I carved:

and carved:

and carved and carved and carved some more.

While I was carving, I asked her what her name is,

and she declared: “Elise, of course!”

She said that even though she preferred playing Mozart when she was a piano,

that she had always loved it when her family played ‘Fur Elise’.

(An interesting thing happened when I told my daughter about tiny Elise-

she knew, even before I said Elise’s name that that was the name of this tiny, but

determined little wooden person!)

Elise let me know that she wanted old fashioned boots

and cream colored stockings and camisole

and that lovely amber color from the shellac for her hair.

She also told me that she wanted me to tat her dress,

and while I was at it, to make the tatting shuttle that I would use

to tat her dress.

And, to make the tatting shuttle a hedgehog, and

to use the bit of wood that was around the lock that used to keep the piano closed.

Elise  helped me to figure out how to get the lock out of the wood….

She insisted that the lovely round brass keyhole had to become part of her tatting shuttle.

Elise chose some old tatting cotton that I had been given

(from the estate of the friend of a friend who didn’t know what to do with it)

Elise and I started freeform tatting her dress.

Sometimes, it didn’t go well.  sigh.

Tatting is the pits to try and unpick, so scissors were the best option:

Elise got a little annoyed at times with all the trying on and taking off of the dress,

but I reminded her that she was the one who demanded it be tatted-

crochet would have been infinitely faster!

She fell on her face and refused to co-operate for awhile, but eventually,

calmed down and we got on with the tatting:

Eventually, Elise’s dress was done.

It’s a bit cattywombus but Elise has forgiven me for that.

She understands that freeforming when making a tatted dress can mean that things are slightly ‘unique’.

Elise is looking forward to having adventures with the other wooden dolls in the studio.

She has placed a few requests for things that she would like to have, thank you very much.

Elise may look young, but you must remember, that she’s a doll with a long, long story!

(and has more to tell, but that is for another day and until then, she and her hedgehog friend will enjoy life in the studio).

 

I have joined a group of wonderful bloggers from all over the world – The Scrap Happy Bloggers- who work with upcycled materials and post once a month.

Here are the links to all their blogs: Do check them out 🙂

Kate Gun, EvaSue, Lynn, Lynda,
Birthe, Turid, Susan, Cathy,  Tracy, Jill,
Claire, JanMoira, SandraChrisAlys,
KerryClaireJeanJon, HayleyDawn,
Gwen, Bekki, Sue L, Sunny, Kjerstin,
Vera, NanetteAnn, Dawn 2 and Noreen

17 Comments

Filed under carving wood, doll & dolls & dollmaking & doll making, eco crafts & green projects, lace making, tatting, upcycling, wooden dolls